RockJocks Johnny Joint lower control arms for TJ Wrangler and LJ Unlimited vehicles as well as all years of XJ Cherokee, MJ Comanche and ZJ Grand Cherokee vehicles provide length adjustability allowing pinion angle to be adjusted after the installation of a suspension lift. Additionally the adjustable feature of our arms allows your vehicle to be upgraded to different lift amounts without having to replace the control arms in the future. Arms are made from 1 in. x .156 in. wall DOM tubing, feature a Johnny Joint rod end at both ends for maximum articulation, are powder coated semi-gloss black, and include zerk fitted grade 8 mounting bolts.
RockJocks Currectlync heavy duty tie rod and drag link system for Jeep TJ, LJ, XJ, MJ and ZJ vehicles has been a staple in the off-road hobby for over 2 decades! Features include a 1 1/4 in. diameter forged alloy drag link, and 1 1/4 in. solid alloy steel tie rod bar that is bored and threaded on the ends, all threaded tie rod ends with massive threads and grease boots are included as well as the RockJock heavy duty steering stabilizer bracket. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components. NOTE: This unit is designed to be used on vehicles with 4 in. of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2 in. bump stop, over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment.
RockJocks right hand thread forged alloy steel tie rod end for their CE-9701 Currectlync heavy duty steering system is designed with 22mm x 1.5 pitch LH threads for maximum strength. Features a zerk fitting for greasing for increased performance and long life. Includes boot, castle nut, and cotter pin. If you are buying a replacement tie rod end for your Currectlync steering - this is the tie rod end with the zerk fitting on the back of the cap that goes on the drivers side of the vehicle! This unit will only work as a replacement part for the RockJock Currectlync system - it may not be used in conjunction with any stock steering components.
RockJocks Johnny Joint lower control arms for TJ Wrangler and LJ Unlimited vehicles as well as all years of XJ Cherokee, MJ Comanche and ZJ Grand Cherokee vehicles provide length adjustability allowing pinion angle to be adjusted after the installation of a suspension lift. Additionally the adjustable feature of our arms allows your vehicle to be upgraded to different lift amounts without having to replace the control arms in the future. Arms are made from 1 in. x .156 in. wall DOM tubing, feature a Johnny Joint rod end at both ends for maximum articulation, are powder coated semi-gloss black, and include zerk fitted grade 8 mounting bolts.
RockJocks Currectlync heavy duty tie rod and drag link system for Jeep TJ, LJ, XJ, MJ and ZJ vehicles has been a staple in the off-road hobby for over 2 decades! Features include a 1 1/4 in. diameter forged alloy drag link, and 1 1/4 in. solid alloy steel tie rod bar that is bored and threaded on the ends, all threaded tie rod ends with massive threads and grease boots are included as well as the RockJock heavy duty steering stabilizer bracket. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components. NOTE: This unit is designed to be used on vehicles with 4 in. of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2 in. bump stop, over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment.
RockJocks right hand thread forged alloy steel tie rod end for their CE-9701 Currectlync heavy duty steering system is designed with 22mm x 1.5 pitch LH threads for maximum strength. Features a zerk fitting for greasing for increased performance and long life. Includes boot, castle nut, and cotter pin. If you are buying a replacement tie rod end for your Currectlync steering - this is the tie rod end with the zerk fitting on the back of the cap that goes on the drivers side of the vehicle! This unit will only work as a replacement part for the RockJock Currectlync system - it may not be used in conjunction with any stock steering components.
This Part Fits:
Year
Make
Model
Submodel
1984-1993
Jeep
Cherokee
Base
1991-1992
Jeep
Cherokee
Briarwood
1985-1988
Jeep
Cherokee
Chief
1996,1998-2001
Jeep
Cherokee
Classic
1993-1997
Jeep
Cherokee
Country
1985-1992
Jeep
Cherokee
Laredo
1987-1992,1998-2001
Jeep
Cherokee
Limited
1985-1990
Jeep
Cherokee
Pioneer
1994-2001
Jeep
Cherokee
SE
1989-2001
Jeep
Cherokee
Sport
1987-1992
Jeep
Comanche
Base
1987-1988
Jeep
Comanche
Chief
1986
Jeep
Comanche
Custom
1988-1992
Jeep
Comanche
Eliminator
1987-1988
Jeep
Comanche
Laredo
1987-1992
Jeep
Comanche
Pioneer
1986
Jeep
Comanche
X
1986
Jeep
Comanche
XLS
1998
Jeep
Grand Cherokee
5.9 Limited
1993
Jeep
Grand Cherokee
Base
1993-1998
Jeep
Grand Cherokee
Laredo
1993-1998
Jeep
Grand Cherokee
Limited
1995,1997
Jeep
Grand Cherokee
Orvis
1994-1995
Jeep
Grand Cherokee
SE
1997-1998
Jeep
Grand Cherokee
TSi
2006
Jeep
Wrangler
65th Anniversary Edition
2003-2006
Jeep
Wrangler
Rubicon
1997-2004
Jeep
Wrangler
Sahara
1997-2006
Jeep
Wrangler
SE
1997-2006
Jeep
Wrangler
Sport
2004-2006
Jeep
Wrangler
Unlimited
2005-2006
Jeep
Wrangler
Unlimited Rubicon
2002-2006
Jeep
Wrangler
X
In Stock
2 years warranty
Delivery time: 1-2 business days
Free 90 days return
Already sold: 1 / 1
Join our newletter
This website uses cookies to ensure you get the best experience on our website.
Choosing a selection results in a full page refresh.