An important part of your 4WD suspension system, Old Man Emu torsion bars dramatically improve your vehicle's ride and handling, both on road and off. They are designed and set for optimum ride performance, while maintaining maximum wheel travel crucial to off road action. Our torsion bars work best when Old Man Emu coil or leaf springs are fitted to the rear of your vehicle, with bars and springs then carefully matched to our premium range of four wheel drive shock absorbers. Together, they'll transform your vehicle's suspension performance.

This Part Fits:

Year	Make	Model	Submodel
1998-2007	Lexus	LX470	Base
1998-2007	Toyota	Land Cruiser	Base

Our Camburg upper arms are designed to address the limitations of stock upper arms when lifting your truck. By replacing the stock ball-joint with a larger 1.25 uni-ball bearing, we improve wheel travel and durability under extreme conditions. We also adjust the caster and camber curve to correct geometry, enhancing driving characteristics and handling. Our arms are meticulously engineered using CAD/CAM software and our in-house CNC machine shop produces all the necessary machined parts. The arms are made from thick .156" wall round tubing, laser cut and CNC bent, and MIG welded in precision fixtures. They are then sandblasted and powder-coated for a durable finish. The arms come with polyurethane frame pivot bushings with grease-able zerk fittings and FK 1.25" PTFE-lined uniballs pre-installed. All necessary hardware is included for installation. The arms are designed for 1-3" of lift and also fit '07-20 Tahoe/Yukon SUVs (without electronic controlled suspension). Please note that some factory wheels may require a wheel spacer and we recommend aftermarket wheels with a zero offset for optimum performance and fit. The factory droop stop must be removed from the frame mount. Our Camburg upper arms are proudly made in the USA and are the best available for your truck.

This Part Fits:

Year	Make	Model	Submodel
2016-2018	Chevrolet	Silverado 1500	Custom
2014-2018	Chevrolet	Silverado 1500	High Country
2009-2013	Chevrolet	Silverado 1500	Hybrid
2007-2013,2015-2018	Chevrolet	Silverado 1500	LS
2007-2018	Chevrolet	Silverado 1500	LT
2007-2018	Chevrolet	Silverado 1500	LTZ
2015-2018	Chevrolet	Silverado 1500	SSV
2007-2018	Chevrolet	Silverado 1500	WT
2010-2013	Chevrolet	Silverado 1500	XFE
2008-2013	Chevrolet	Tahoe	Hybrid
2007-2020	Chevrolet	Tahoe	LS
2007-2020	Chevrolet	Tahoe	LT
2007-2016	Chevrolet	Tahoe	LTZ
2007-2020	Chevrolet	Tahoe	PPV
2017-2020	Chevrolet	Tahoe	Premier
2012-2020	Chevrolet	Tahoe	SSV
2014-2018	GMC	Sierra 1500	Base
2007-2018	GMC	Sierra 1500	Denali
2009-2013	GMC	Sierra 1500	Hybrid
2007-2013	GMC	Sierra 1500	SL
2007-2018	GMC	Sierra 1500	SLE
2007-2018	GMC	Sierra 1500	SLT
2007-2013	GMC	Sierra 1500	WT
2010-2013	GMC	Sierra 1500	XFE
2007-2020	GMC	Yukon	Denali
2010-2013	GMC	Yukon	Denali Hybrid
2008-2013	GMC	Yukon	Hybrid
2007-2020	GMC	Yukon	SLE
2007-2020	GMC	Yukon	SLT
2007-2014	GMC	Yukon XL 1500	Denali
2007-2014	GMC	Yukon XL 1500	SLE
2007-2014	GMC	Yukon XL 1500	SLT

Our Camburg upper arms are designed to address the limitations of stock upper arms when lifting your truck. By replacing the stock ball-joint with a larger 1.25 uni-ball bearing, we improve wheel travel and durability under extreme conditions. We also adjust the caster and camber curve to correct geometry, resulting in improved driving characteristics and handling. Our arms are designed using CAD/CAM engineering software and manufactured in-house with precision. They feature thicker .156" wall round tubing, laser-cut and CNC-bent tubes, and MIG welding. The arms come with polyurethane frame pivot bushings with grease-able zerk fittings and FK 1.25" PTFE-lined uniballs pre-installed. They are finished with steel gray powder-coating and include all necessary hardware for installation. Please note that these arms are not compatible with vehicles equipped with electronic adaptive ride control suspension systems. They are designed for 1-3" of lift and may require trimming of plastic inner fenders to eliminate tire rubbing. Additionally, 20" OEM wheels and tires and 18" OEM wheels with larger tires than stock are not compatible with this suspension system.

This Part Fits:

Year	Make	Model	Submodel
2019-2024	Chevrolet	Silverado 1500	Custom
2019-2024	Chevrolet	Silverado 1500	Custom Trail Boss
2019-2024	Chevrolet	Silverado 1500	High Country
2019-2024	Chevrolet	Silverado 1500	LT
2019-2024	Chevrolet	Silverado 1500	LT Trail Boss
2019-2024	Chevrolet	Silverado 1500	LTZ
2023-2024	Chevrolet	Silverado 1500	PPV
2019-2024	Chevrolet	Silverado 1500	RST
2019-2021	Chevrolet	Silverado 1500	SSV
2019-2024	Chevrolet	Silverado 1500	WT
2022-2024	Chevrolet	Silverado 1500	ZR2
2019-2024	GMC	Sierra 1500	AT4
2022-2024	GMC	Sierra 1500	AT4X
2019-2021	GMC	Sierra 1500	Base
2019-2024	GMC	Sierra 1500	Denali
2022-2024	GMC	Sierra 1500	Denali Ultimate
2019-2024	GMC	Sierra 1500	Elevation
2022-2024	GMC	Sierra 1500	Pro
2019-2024	GMC	Sierra 1500	SLE
2019-2024	GMC	Sierra 1500	SLT

These arms are meticulously designed and crafted using CAD and CNC machining. They are made from aerospace quality 6061 billet aluminum and undergo bead blasting, Type II anodizing, and laser etching for a sleek gun metal gray finish. The arms feature a larger FK 1.25" uniball with a PTFE liner for increased strength and misalignment, allowing for maximum wheel travel. They are made in the USA and are superior to cheaper imports. The uniball is adapted to the spindle/knuckle using model-specific spacers made from heat-treated stainless steel. No drilling or modifications are required. The arms also utilize FK 7/8" chromoly heim joints for additional camber and caster adjustment, eliminating flexing/deflection under hard use. AN/Mil-spec hardware, including a single pinch bolt and secondary jam nut, ensures secure attachment. The new V2 design improves wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. These arms are designed for 1-4.5" of lift and do not fit the Bronco Raptor.

This Part Fits:

Year	Make	Model	Submodel
2021-2025	Ford	Bronco	Badlands
2021-2023	Ford	Bronco	Base
2021-2025	Ford	Bronco	Big Bend
2021-2024	Ford	Bronco	Black Diamond
2022-2024	Ford	Bronco	Everglades
2021	Ford	Bronco	First Edition
2023-2025	Ford	Bronco	Heritage Edition
2023-2024	Ford	Bronco	Heritage Limited Edition
2021-2025	Ford	Bronco	Outer Banks
2021-2024	Ford	Bronco	Wildtrak

Our updated design features a billet aluminum cover for the uniball, preventing dirt and contaminants from entering. The cap is press-fit with an O-ring seal. Our Camburg upper arms replace stock ball-joints with a larger 1.25 uni-ball bearing, increasing wheel travel and durability. We optimize geometry for correct alignment and improved handling using CAD/CAM software and laser scanning. Manufactured in-house, our arms are laser cut, bent, MIG welded, sandblasted, and powder-coated. Machined parts include stainless steel uniball mis-alignment spacers. Features include increased wheel travel, corrected camber and caster, elimination of weak ball-joints, thick tubing, polyurethane bushings with grease-able fittings, PTFE-lined uniballs, steel gray powder-coating, and all necessary hardware. Designed for 1-3" lift. Note that trimming may be required for certain wheel/tire combinations, and larger OEM wheels/tires may require hub-centric wheel spacers.

This Part Fits:

Year	Make	Model	Submodel
2010-2014	Ford	F-150	FX2
2009-2014	Ford	F-150	FX4
2010-2012	Ford	F-150	Harley-Davidson Edition
2009-2020	Ford	F-150	King Ranch
2009-2020	Ford	F-150	Lariat
2013-2014,2016-2020	Ford	F-150	Limited
2009-2020	Ford	F-150	Platinum
2018-2020	Ford	F-150	Police Responder
2016-2020	Ford	F-150	SSV
2009-2014	Ford	F-150	STX
2009-2020	Ford	F-150	XL
2009-2020	Ford	F-150	XLT

Our Camburg upper arms are designed to address the limitations of stock upper arms when lifting your truck. By replacing the stock ball-joint with a larger 1.25 uni-ball bearing, we improve wheel travel and durability under extreme conditions. We also incorporate a billet aluminum cover to protect the uniball from dirt and contaminants. Our arms are designed using CAD/CAM engineering software and manufactured in-house with precision welding and machining. They come with polyurethane frame pivot bushings, FK 1.25" PTFE-lined uniballs, and all necessary hardware for installation. These arms are compatible with lifts of 1-3" and correct camber and caster.

This Part Fits:

Year	Make	Model	Submodel
2021-2024	Ford	F-150	King Ranch
2021-2024	Ford	F-150	Lariat
2021-2023	Ford	F-150	Limited
2021-2024	Ford	F-150	Platinum
2021-2024	Ford	F-150	Police Responder
2021-2024	Ford	F-150	SSV
2021-2024	Ford	F-150	Tremor
2021-2024	Ford	F-150	XL
2021-2024	Ford	F-150	XLT

The Camburg upper arms are designed to improve the performance and durability of your truck's suspension. They feature a larger 1.25 uni-ball bearing, which increases wheel travel and provides greater strength under extreme conditions. The arms also incorporate a billet aluminum cover to protect the uni-ball from dirt and contaminants. With CAD/CAM engineering and precision manufacturing, these arms are made to strict standards. They correct camber and caster, eliminate weak factory ball-joints, and come with polyurethane frame pivot bushings with grease-able zerk fittings. The arms are made in the USA and designed for 1-3" of lift. They include uniball spacers for both aluminum and steel OEM knuckles. Please note that they are compatible with US model trucks only.

This Part Fits:

Year	Make	Model	Submodel
2019-2023	Ford	Ranger	Lariat
2019-2023	Ford	Ranger	XL
2019-2023	Ford	Ranger	XLT

Our 1.25" uniball upper arms for '10-14 Ford Raptors offer technical improvements while keeping costs down. They use polyurethane bushings instead of heims, allowing for less maintenance. The smaller uniball allows for the use of factory offset wheels and tires. By replacing the stock ball-joint with a larger 1.25" uni-ball bearing, we increase wheel travel and durability under extreme conditions. Our arms also improve alignment, driving characteristics, and handling. Manufactured in-house, they are made from 4130 chromoly and feature laser-cut and CNC-bent tubes, MIG welding, and a steel gray powder-coating. Polyurethane frame pivot bushings with grease-able zerk fittings and FK 1.25" PTFE-lined uniballs are included. All necessary hardware is provided, and the arms are designed for 1-3" of lift. When using the factory OEM 17" wheel, a 1/4" wheel spacer may be needed for larger tires. Made in the USA.

This Part Fits:

Year	Make	Model	Submodel
2010-2014	Ford	F-150	SVT Raptor

Our Camburg KINETIK Series billet upper control arms are designed specifically for the 2017-2024 Gen2 and Gen3 Ford Raptors, including the 2019+ models with FOX Live Valve electronic suspension. These arms have undergone extensive CAD designing and machining to meet our high standards. They are CNC machined in-house from aerospace quality 6061 billet aluminum, bead blasted, Type II anodized gun metal gray, and feature our Camburg logo laser etched. The arms utilize a larger FK 1.25" uniball with a PTFE liner for increased strength and mis-alignment, allowing for maximum wheel travel. Made in the USA, these arms are superior to cheaper imports. The uniball is adapted to the spindle/knuckle using model specific spacers machined from heat-treated stainless steel, ensuring a precise fit without the need for drilling or modifications. The 1.25" uniball allows for a larger and stronger 9/16" 12 point bolt with a low profile press-on uniball cap to resist the elements. Additional camber and caster adjustment is possible with the use of larger and stronger FK 7/8" chromoly heim joints, which also eliminate flexing/deflection under hard use and braking without binding. AN/Mil-spec hardware, including a single pinch bolt and secondary jam nut, ensures secure attachment of the heim joint. For 2019+ models with a position sensor incorporated into the FOX electronic suspension, stainless brackets are provided to attach to our arms for the sensor linkage, along with a drill template for proper positioning. The installation process is simple. The new V2 design of these control arms increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. All necessary hardware is included for installation, and the arms are designed for 1-3" of lift. When using the factory OEM 17" wheels, a 1/4" - 3/8" wheel spacer may be required when running larger tires than stock. We recommend zero offset wheels (5.00" backspacing) when running larger tires than stock.

This Part Fits:

Year	Make	Model	Submodel
2017-2025	Ford	F-150	Raptor

These arms are meticulously designed and crafted using CAD and CNC machining. They are made from aerospace quality 6061 billet aluminum and undergo bead blasting, Type II anodizing, and laser etching for a sleek gun metal gray finish with our Camburg logo. The larger FK 1.25" uniball with a PTFE liner provides increased strength and mis-alignment for maximum wheel travel. The arms are made in the USA and are superior to cheaper imports. Model specific spacers machined from heat-treated stainless steel adapt the uniball to the spindle/knuckle without drilling or modifications. The 1.25" uniball allows for a larger bolt with a low profile press-on cap to resist the elements. The use of FK 7/8" chromoly heim joints allows for additional camber and caster adjustment while eliminating flexing/deflection and binding. AN/Mil-spec hardware, including a single pinch bolt and secondary jam nut, ensures secure heim joint performance in off-road conditions. The new V2 design increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. All necessary hardware is included for installation. These arms are designed for 1-3" of lift.

This Part Fits:

Year	Make	Model	Submodel
2024-2025	Lexus	GX550	Luxury
2024-2025	Lexus	GX550	Luxury+
2024-2025	Lexus	GX550	Overtrail
2024-2025	Lexus	GX550	Overtrail+
2024-2025	Lexus	GX550	Premium
2024-2025	Lexus	GX550	Premium+
2022-2024	Lexus	LX600	Base
2022	Lexus	LX600	F Sport
2023-2025	Lexus	LX600	F Sport Handling
2022-2025	Lexus	LX600	Luxury
2022-2025	Lexus	LX600	Premium
2022-2024	Lexus	LX600	Ultra Luxury
2025	Toyota	4Runner	Limited
2025	Toyota	4Runner	Platinum
2025	Toyota	4Runner	SR5
2025	Toyota	4Runner	Trailhunter
2025	Toyota	4Runner	TRD Off-Road
2025	Toyota	4Runner	TRD Off-Road Premium
2025	Toyota	4Runner	TRD Pro
2025	Toyota	4Runner	TRD Sport
2025	Toyota	4Runner	TRD Sport Premium
2024-2025	Toyota	Land Cruiser	1958
2024-2025	Toyota	Land Cruiser	Base
2024	Toyota	Land Cruiser	First Edition
2024-2025	Toyota	Tacoma	Limited
2024-2025	Toyota	Tacoma	SR
2024-2025	Toyota	Tacoma	SR5
2024-2025	Toyota	Tacoma	Trailhunter
2024-2025	Toyota	Tacoma	TRD Off-Road
2024-2025	Toyota	Tacoma	TRD PreRunner
2024-2025	Toyota	Tacoma	TRD Pro
2024-2025	Toyota	Tacoma	TRD Sport

Introducing the Camburg X-Joint, a high-performance ball-joint designed for extreme conditions. Made with heat-treated materials and an improved boot design, it offers increased strength, better greasing, and longer lifespan. The dual lip seal design prevents contamination, while the grease zerk fitting allows for easy maintenance. Specifically designed for our ball-joint upper arms, the X-Joint provides optimal fit and maximum wheel travel. It corrects suspension geometry, improves handling, and offers a wider range of alignment adjustment. With a tubular construction and thicker wall tubing, it provides more tire and shock clearance. The X-Joint is pre-installed with polyurethane frame pivot bushings and comes with all necessary hardware. Made in the USA, it is compatible with 1-3" of lift and corrects camber and caster.

This Part Fits:

Year	Make	Model	Submodel
2010-2022	Lexus	GX460	Base
2014-2022	Lexus	GX460	Luxury
2010-2022	Lexus	GX460	Premium
2003,2005-2009	Lexus	GX470	Base
2023	Toyota	4Runner	40th Anniversary Edition
2003-2024	Toyota	4Runner	Limited
2020-2021	Toyota	4Runner	Nightshade
2003-2009	Toyota	4Runner	Sport
2003-2024	Toyota	4Runner	SR5
2018-2024	Toyota	4Runner	SR5 Premium
2010-2016,2021-2022	Toyota	4Runner	Trail
2017-2024	Toyota	4Runner	TRD Off-Road
2018-2024	Toyota	4Runner	TRD Off-Road Premium
2015-2024	Toyota	4Runner	TRD Pro
2022-2024	Toyota	4Runner	TRD Sport
2020-2021	Toyota	4Runner	Venture
2007-2014	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition

These arms are meticulously designed and crafted using CAD and CNC machining. They are made from aerospace quality 6061 billet aluminum and undergo bead blasting, Type II anodizing, and laser etching for a sleek gun metal gray finish. The arms feature a larger FK 1.25" uniball with a PTFE liner for increased strength and misalignment, allowing for maximum wheel travel. They are made in the USA and are superior to cheaper imports. The uniball is adapted to the spindle/knuckle using model-specific spacers made from heat-treated stainless steel. No drilling or modifications are required. The arms also utilize larger and stronger FK 7/8" chromoly heim joints for additional camber and caster adjustment. These heim joints eliminate flexing/deflection and provide zero binding under hard use and braking. The arms come with AN/Mil-spec hardware, including a single pinch bolt and secondary jam nut for secure attachment. The V2 design of these arms increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. They are designed for 1-3" of lift and come with all necessary hardware for installation.

This Part Fits:

Year	Make	Model	Submodel
2010-2022	Lexus	GX460	Base
2014-2022	Lexus	GX460	Luxury
2010-2022	Lexus	GX460	Premium
2003,2005-2009	Lexus	GX470	Base
2023	Toyota	4Runner	40th Anniversary Edition
2003-2024	Toyota	4Runner	Limited
2020-2021	Toyota	4Runner	Nightshade
2003-2009	Toyota	4Runner	Sport
2003-2024	Toyota	4Runner	SR5
2018-2024	Toyota	4Runner	SR5 Premium
2010-2016,2021-2022	Toyota	4Runner	Trail
2017-2024	Toyota	4Runner	TRD Off-Road
2018-2024	Toyota	4Runner	TRD Off-Road Premium
2015-2024	Toyota	4Runner	TRD Pro
2022-2024	Toyota	4Runner	TRD Sport
2020-2021	Toyota	4Runner	Venture
2007-2014	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition
2006-2015	Toyota	Tacoma	Base
2016-2023	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2023	Toyota	Tacoma	SR
2016-2023	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2023	Toyota	Tacoma	Trail Special Edition
2016-2023	Toyota	Tacoma	TRD Off-Road
2015,2017-2023	Toyota	Tacoma	TRD Pro
2016-2023	Toyota	Tacoma	TRD Sport

When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint  with a larger 1.00 uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Using the latest CAD/CAM engineering software we design these arms to the strictest standards using our FARO laser scan arm to model the OEM parts and frames. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder-coated. Our in-house CNC machine shop makes all the machined parts including the uniball mis-alignment spacers from heat-treated stainless steel. We pride ourselves in producing the best parts available under our own roof and control. Increases usable wheel travel Corrects camber and caster Eliminates weak factory ball-joints Thicker.156" wall round tubing Laser cut and CNC bent tubes MIG welded CAD/CAM engineered Polyurethane frame pivot bushings with grease-able zerk fittings FK 1.00" PTFE-lined uniballs pre-installed Steel gray powder-coating All necessary hardware included and ready to install Made in the USA Designed for 1-3" of lift Increases usable wheel travel Corrects camber and caster Eliminates weak factory ball-joints 1.00" FK uniballs.

This Part Fits:

Year	Make	Model	Submodel
1996-2001	Toyota	4Runner	Base
1996-2002	Toyota	4Runner	Limited
1996-2002	Toyota	4Runner	SR5
1996-2004	Toyota	Tacoma	Base
1998	Toyota	Tacoma	DLX
1998-2000	Toyota	Tacoma	Limited
1998-2004	Toyota	Tacoma	Pre Runner
1996-2000	Toyota	Tacoma	SR5

When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper arms address these issues and more.  Replacing the stock ball-joint  with a larger 1.25 uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Using the latest CAD/CAM engineering software we design these arms to the strictest standards using our FARO laser scan arm to model the OEM parts and frames. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder-coated. Our in-house CNC machine shop makes all the machined parts including the uniball mis-alignment spacers from heat-treated stainless steel. We pride ourselves in producing the best parts available under our own roof and control.

This Part Fits:

Year	Make	Model	Submodel
2010-2022	Lexus	GX460	Base
2014-2022	Lexus	GX460	Luxury
2010-2022	Lexus	GX460	Premium
2003,2005-2009	Lexus	GX470	Base
2023	Toyota	4Runner	40th Anniversary Edition
2003-2024	Toyota	4Runner	Limited
2020-2021	Toyota	4Runner	Nightshade
2003-2009	Toyota	4Runner	Sport
2003-2024	Toyota	4Runner	SR5
2018-2024	Toyota	4Runner	SR5 Premium
2010-2016,2021-2022	Toyota	4Runner	Trail
2017-2024	Toyota	4Runner	TRD Off-Road
2018-2024	Toyota	4Runner	TRD Off-Road Premium
2015-2024	Toyota	4Runner	TRD Pro
2022-2024	Toyota	4Runner	TRD Sport
2020-2021	Toyota	4Runner	Venture
2007-2014	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition
2006-2015	Toyota	Tacoma	Base
2016-2023	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2023	Toyota	Tacoma	SR
2016-2023	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2023	Toyota	Tacoma	Trail Special Edition
2016-2023	Toyota	Tacoma	TRD Off-Road
2015,2017-2023	Toyota	Tacoma	TRD Pro
2016-2023	Toyota	Tacoma	TRD Sport

Our updated design features a billet aluminum cover for the uniball, providing protection against dirt and contaminants. The cap is press-fit and sealed with an O-ring. Our Camburg upper arms replace the stock ball-joint with a larger 1.25 uni-ball bearing, increasing wheel travel and durability. We also improve caster and camber curves for better alignment and handling. Our arms are designed using CAD/CAM software and manufactured in-house with precision welding and CNC machining. They come with polyurethane frame pivot bushings, grease-able zerk fittings, and FK 1.25" PTFE-lined uniballs. The arms are powder-coated and include all necessary hardware. They are designed for 1-3" of lift and fit 6 lug model trucks.

This Part Fits:

Year	Make	Model	Submodel
2010-2022	Lexus	GX460	Base
2014-2022	Lexus	GX460	Luxury
2010-2022	Lexus	GX460	Premium
2003,2005-2009	Lexus	GX470	Base
2023	Toyota	4Runner	40th Anniversary Edition
2003-2024	Toyota	4Runner	Limited
2020-2021	Toyota	4Runner	Nightshade
2003-2009	Toyota	4Runner	Sport
2003-2024	Toyota	4Runner	SR5
2018-2024	Toyota	4Runner	SR5 Premium
2010-2016,2021-2022	Toyota	4Runner	Trail
2017-2024	Toyota	4Runner	TRD Off-Road
2018-2024	Toyota	4Runner	TRD Off-Road Premium
2015-2024	Toyota	4Runner	TRD Pro
2022-2024	Toyota	4Runner	TRD Sport
2020-2021	Toyota	4Runner	Venture
2007-2014	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition
2006-2015	Toyota	Tacoma	Base
2016-2023	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2023	Toyota	Tacoma	SR
2016-2023	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2023	Toyota	Tacoma	Trail Special Edition
2016-2023	Toyota	Tacoma	TRD Off-Road
2015,2017-2023	Toyota	Tacoma	TRD Pro
2016-2023	Toyota	Tacoma	TRD Sport

Introducing the Camburg X-Joint, a high-performance ball-joint designed for extreme conditions. Made with heat-treated materials and an improved boot design, it offers increased strength, better greasing, and extended longevity. The fully sealed dual lip seal design prevents contamination from dirt, sand, rain, mud, and snow. With a grease zerk fitting, you can easily grease the joint without removing the boot. Specifically designed for our ball-joint upper arms, the X-Joint provides optimum fit and maximum wheel travel. It corrects suspension geometry, improves handling, and allows for a wider range of alignment adjustment. The tubular construction offers more tire and shock clearance compared to stock arms. CNC bent tubes, MIG welded, and featuring thicker .156" wall round tubing, these arms are built to last. Polyurethane frame pivot bushings with grease-able zerk fittings ensure smooth operation. The Camburg X-Joint comes pre-installed with billet aluminum covers and a matte black powder-coating. All necessary hardware is included for easy installation. Designed for 1-3" of lift, it increases usable wheel travel and corrects camber and caster. Made in the USA in-house, the Camburg X-Joint is the perfect upgrade for 6 lug model trucks.

This Part Fits:

Year	Make	Model	Submodel
2006-2015	Toyota	Tacoma	Base
2016-2023	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2023	Toyota	Tacoma	SR
2016-2023	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2023	Toyota	Tacoma	Trail Special Edition
2016-2023	Toyota	Tacoma	TRD Off-Road
2015,2017-2023	Toyota	Tacoma	TRD Pro
2016-2023	Toyota	Tacoma	TRD Sport

When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper control arms address these issues and more.  Replacing the stock ball-joint  with a larger 1.00 uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling. Using the latest CAD/CAM engineering software we design these arms to the strictest standards using our FARO laser scan arm to model the OEM parts and frames. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder-coated. Our in-house CNC machine shop makes all the machined parts including the uniball mis-alignment spacers from heat-treated stainless steel. We pride ourselves in producing the best parts available under our own roof and control. Increases usable wheel travel Corrects camber and caster Eliminates weak factory ball-joints Thicker.156" wall round tubing Laser cut and CNC bent tubes MIG welded CAD/CAM engineered Polyurethane frame pivot bushings with grease-able zerk fittings FK 1.00" PTFE-lined uniballs pre-installed Steel gray powder-coating All necessary hardware included and ready to install Made in the USA Designed for 1-3" of lift. These also fit 2001-2007 Toyota Sequoia's. These also fit 2001-2007 Toyota Sequoia's.

This Part Fits:

Year	Make	Model	Submodel
2001-2007	Toyota	Sequoia	Limited
2001-2007	Toyota	Sequoia	SR5
2000-2006	Toyota	Tundra	Base
2000-2006	Toyota	Tundra	Limited
2000-2006	Toyota	Tundra	SR5

Our Camburg upper arms are designed to address the limitations of stock upper arms when lifting your truck. By replacing the stock ball-joint with a larger 1.50 uni-ball bearing, we improve wheel travel and durability under extreme conditions. We also adjust the camber curve and increase caster to correct geometry, resulting in improved driving characteristics and handling. Our arms are designed using CAD/CAM engineering software and manufactured in-house with precision. They feature thicker .156" wall round tubing, laser-cut and CNC-bent tubes, and MIG welding. The arms come with polyurethane frame pivot bushings with grease-able zerk fittings, FK 1.50" PTFE-lined uniballs, and steel gray powder-coating. All necessary hardware is included for installation. The arms are made in the USA and designed for 1-3" of lift, compatible with 2008-2022 Toyota Sequoias. Additionally, this suspension system is not compatible with 20" OEM wheels and tires and 18" OEM wheels with larger tires than stock.

This Part Fits:

Year	Make	Model	Submodel
2008-2022	Toyota	Sequoia	Limited
2021-2022	Toyota	Sequoia	Nightshade
2008-2022	Toyota	Sequoia	Platinum
2008-2022	Toyota	Sequoia	SR5
2020-2022	Toyota	Sequoia	TRD Pro
2018-2022	Toyota	Sequoia	TRD Sport
2014-2021	Toyota	Tundra	1794 Edition
2007-2013	Toyota	Tundra	Base
2007-2021	Toyota	Tundra	Limited
2021	Toyota	Tundra	Nightshade
2010-2021	Toyota	Tundra	Platinum
2014-2021	Toyota	Tundra	SR
2007-2011,2014-2021	Toyota	Tundra	SR5
2021	Toyota	Tundra	Trail
2015-2017,2019-2021	Toyota	Tundra	TRD Pro

Introducing the Camburg KINETIK Series billet upper arms, the ultimate setup for your rig. These arms are meticulously designed and refined to meet our high standards. CNC machined from aerospace quality 6061 billet aluminum, they are bead blasted, Type II anodized gun metal gray, and feature our laser-etched Camburg logo. Equipped with a larger FK 1.50" uniball with a PTFE liner, these arms offer increased strength and mis-alignment for maximum wheel travel. Made in the USA, they are far superior to cheaper imports. The uniball is adapted to the spindle/knuckle using model-specific spacers machined from heat-treated stainless steel. No drilling or modifications are required. The 1.50" uniball allows for a larger and stronger 9/16" 12-point bolt with a low-profile press-on uniball cap for durability. Additional camber and caster adjustment is possible with the use of larger and stronger FK 7/8" chromoly heim joints, which also eliminate flexing/deflection under hard use and braking without binding. The arms come with AN/Mil-spec hardware, including a single pinch bolt and secondary jam nut for secure heim joint attachment. The new V2 design increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. All necessary hardware is included for easy installation. Designed for 1-3" of lift, these arms also fit 2008-2022 Toyota Sequoias.

This Part Fits:

Year	Make	Model	Submodel
2008-2022	Toyota	Sequoia	Limited
2021-2022	Toyota	Sequoia	Nightshade
2008-2022	Toyota	Sequoia	Platinum
2008-2022	Toyota	Sequoia	SR5
2020-2022	Toyota	Sequoia	TRD Pro
2018-2022	Toyota	Sequoia	TRD Sport
2014-2021	Toyota	Tundra	1794 Edition
2007-2013	Toyota	Tundra	Base
2007-2021	Toyota	Tundra	Limited
2021	Toyota	Tundra	Nightshade
2010-2021	Toyota	Tundra	Platinum
2014-2021	Toyota	Tundra	SR
2007-2011,2014-2021	Toyota	Tundra	SR5
2021	Toyota	Tundra	Trail
2015-2017,2019-2021	Toyota	Tundra	TRD Pro

You asked for it! Now we offer our KINETIK billet upper arms anodized to match your King shocks to really show off your suspension. Countless hours were spent designing and refining these arms to the point where they met our high standards. CAD designing and machining gave us the ability to bring some new design elements and features to the table. We CNC machine these from aerospace quality 6061 billet aluminum, then send them out to be bead blasted, Type II anodized blue and have our Camburg logo laser etched. These can allow for more wheel travel with extended length coilovers and we correct the suspension geometry with an increase in caster to improve the handling both on and off-road. This gives your truck a much more predictable and precision feel, especially once you leave the pavement and hit the dirt. Like our tubular arms we use a larger FK 1.25” uniball that has a PTFE liner for increased strength and mis-alignment for maximum useable wheel travel. Made in the USA these are far superior to the cheaper and smaller imports other companies use. Adapting the uniball to the spindle/knuckle is done using model specific spacers that match the factory taper precisely. These are machined from heat-treated stainless steel and are a one piece design for increased strength. No drilling or modifications are needed. The 1.25” uniball gives us the ability to run a 12 point bolt with a low profile press-on uniball cap to resist the elements. Using larger and stronger FK 7/8” chromoly heim joints allows for additional camber and caster adjustment if needed. Using a heim joint also eliminates flexing/deflection under hard use and braking with zero binding when in use. Using AN/Mil-spec hardware we have a single pinch bolt and secondary jam nut to insure the heim is secure with the rigors of off-road use.

This Part Fits:

Year	Make	Model	Submodel
2008-2022	Toyota	Sequoia	Limited
2021-2022	Toyota	Sequoia	Nightshade
2008-2022	Toyota	Sequoia	Platinum
2008-2022	Toyota	Sequoia	SR5
2020-2022	Toyota	Sequoia	TRD Pro
2018-2022	Toyota	Sequoia	TRD Sport
2014-2021	Toyota	Tundra	1794 Edition
2007-2013	Toyota	Tundra	Base
2007-2021	Toyota	Tundra	Limited
2021	Toyota	Tundra	Nightshade
2010-2021	Toyota	Tundra	Platinum
2014-2021	Toyota	Tundra	SR
2007-2011,2014-2021	Toyota	Tundra	SR5
2021	Toyota	Tundra	Trail
2015-2017,2019-2021	Toyota	Tundra	TRD Pro

Introducing the Camburg X-Joint, a high-performance ball-joint designed for extreme conditions. Made with heat-treated materials and an improved boot design, it offers increased strength, better greasing, and longer lifespan. The dual lip seal design prevents contamination, while the grease zerk fitting allows for easy maintenance. Specifically designed for our ball-joint upper arms, it provides optimal fit and maximum wheel travel. These arms correct suspension geometry, improve handling, and offer a wider range of alignment adjustment. With CNC bent tubes, MIG welded construction, and polyurethane frame pivot bushings, they are built to last. The package includes all necessary hardware and is made in the USA.

This Part Fits:

Year	Make	Model	Submodel
2008-2022	Toyota	Sequoia	Limited
2021-2022	Toyota	Sequoia	Nightshade
2008-2022	Toyota	Sequoia	Platinum
2008-2022	Toyota	Sequoia	SR5
2020-2022	Toyota	Sequoia	TRD Pro
2018-2022	Toyota	Sequoia	TRD Sport
2014-2021	Toyota	Tundra	1794 Edition
2007-2013	Toyota	Tundra	Base
2007-2021	Toyota	Tundra	Limited
2021	Toyota	Tundra	Nightshade
2010-2021	Toyota	Tundra	Platinum
2014-2021	Toyota	Tundra	SR
2007-2011,2014-2021	Toyota	Tundra	SR5
2021	Toyota	Tundra	Trail
2015-2017,2019-2021	Toyota	Tundra	TRD Pro

These arms are meticulously designed and crafted using CAD and CNC machining. They are made from aerospace quality 6061 billet aluminum and undergo bead blasting, Type II anodizing, and laser etching for a sleek gun metal gray finish with our Camburg logo. The larger FK 1.25" uniball with a PTFE liner provides increased strength and mis-alignment for maximum wheel travel. The arms are made in the USA and are superior to cheaper imports. Model specific spacers machined from heat-treated stainless steel adapt the uniball to the spindle/knuckle without drilling or modifications. The 1.25" uniball allows for a larger bolt with a low profile press-on cap to resist the elements. The use of FK 7/8" chromoly heim joints allows for additional camber and caster adjustment while eliminating flexing/deflection and binding. AN/Mil-spec hardware, including a single pinch bolt and secondary jam nut, ensures secure heim joint performance in off-road conditions. The new V2 design increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. All necessary hardware is included for installation. These arms are designed for 1-3" of lift.

This Part Fits:

Year	Make	Model	Submodel
2025	Toyota	Sequoia	1794 Edition
2023-2025	Toyota	Sequoia	Capstone
2023-2025	Toyota	Sequoia	Limited
2023-2025	Toyota	Sequoia	Platinum
2023-2025	Toyota	Sequoia	SR5
2023-2025	Toyota	Sequoia	TRD Pro
2022-2025	Toyota	Tundra	1794 Edition
2022-2025	Toyota	Tundra	Capstone
2022-2025	Toyota	Tundra	Limited
2022-2025	Toyota	Tundra	Platinum
2022-2025	Toyota	Tundra	SR
2022-2025	Toyota	Tundra	SR5
2022-2025	Toyota	Tundra	TRD Pro

The Carli Universal 12" Limit Strap Kit is designed to fit a wide range of vehicles and is included with Radius Arm kits.

Pitman and Idler arms have been an inherent wear problem within the steering systems of Chevy and GMC trucks and SUVs for decades. The Cognito PISK (Pitman and Idler Arm Support Kit) replace the problem components that plague factory and aftermarket steering systems on several models and years of GM trucks and SUVs.These improvements are accomplished through application of Cognito's innovative, patented design, by providing additional support to the vehicles pitman and idler arms, which eliminate the forward and rearward movement of the center-link. Kit includes all necessary mounting hardware.Note:Only for use on stock height or lifted vehicles with the OE center-link in the stock location.This Cognito product is protected by Utility Patent number US 7,475,891 B2 - All Rights Reserved

This Part Fits:

Year	Make	Model	Submodel
2001-2006	Chevrolet	Silverado 2500 HD	LS
2001-2010	Chevrolet	Silverado 2500 HD	LT
2007-2010	Chevrolet	Silverado 2500 HD	LTZ
2003-2010	Chevrolet	Silverado 2500 HD	WT
2007-2010	Chevrolet	Silverado 3500 HD	LT
2007-2010	Chevrolet	Silverado 3500 HD	LTZ
2007-2010	Chevrolet	Silverado 3500 HD	WT
2001	Chevrolet	Suburban 2500	Base
2001-2013	Chevrolet	Suburban 2500	LS
2001-2013	Chevrolet	Suburban 2500	LT
2007	Chevrolet	Suburban 2500	LTZ
2001-2002	GMC	Sierra 2500	SL
2001-2004	GMC	Sierra 2500	SLE
2001-2004	GMC	Sierra 2500	SLT
2003-2004	GMC	Sierra 2500	WT
2001-2002,2006	GMC	Sierra 2500 HD	SL
2001-2010	GMC	Sierra 2500 HD	SLE
2001-2010	GMC	Sierra 2500 HD	SLT
2003-2010	GMC	Sierra 2500 HD	WT
2001-2002,2006	GMC	Sierra 3500	SL
2001-2006	GMC	Sierra 3500	SLE
2001-2006	GMC	Sierra 3500	SLT
2004-2006	GMC	Sierra 3500	WT
2007-2010	GMC	Sierra 3500 HD	SLE
2007-2010	GMC	Sierra 3500 HD	SLT
2007-2010	GMC	Sierra 3500 HD	WT
2001-2013	GMC	Yukon XL 2500	SLE
2001-2013	GMC	Yukon XL 2500	SLT