Offering up to 5,000 pounds of load-leveling capacity, the LoadLifter 5000 kit from Air Lift will make towing and hauling with your Dodge/RAM 2500/3500 a comfortable and stress-free experience. For frequent use, our fully-adjustable, industry leading air springs are the perfect partner for your vehicle, eliminating any issues that you might face. The LoadLifter 5000 kit helps to eliminate problems frequently faced when towing and hauling, such as squat, poor headlight aim, trailer sway, body roll, and bottoming out. With the added stability and weight-distribution that air springs provide, you can haul safely, knowing that you have optimal braking and steering control. With the ability to adjust the air pressure from 5-100 PSI, your Ram 2500/3500 can be ready for any weight and any situation (Note: Do not exceed vehicle's gross vehicle weight rating (GVWR)). An Air Lift exclusive, each kit comes equipped with upper and lower roll plates, added to protect the air springs from sharp edges, while increasing the load capacity by 10%. The air springs themselves are built like a tire, reinforced with 2-ply fabric for maximum strength. All of the end caps are made with an ultra high-strength nylon composite formula, strong as steel but much lighter and corrosion proof. As the leader in air suspension products for more than 70 years, Air Lift is committed to delivering quality load support parts that last. To ensure the highest quality, longevity, and customer satisfaction, the key suspension components, including the air springs and all hardware, have all been torture-tested to 1 million cycles on our hydraulic test rig. With a lifetime warranty and 60-Day Ride Satisfaction Guarantee -- not to mention the Air Lift reputation for great customer service and technical support, should you run into any snags in the installation process -- you can purchase this kit with peace of mind. Installing the kit is a simple process, requiring only common hand tools and no frame

This Part Fits:

Year	Make	Model	Submodel
2003,2005-2010	Dodge	Ram 2500	Laramie
2006-2010	Dodge	Ram 2500	Power Wagon
2003-2010	Dodge	Ram 2500	SLT
2006-2007	Dodge	Ram 2500	Sport
2003-2010	Dodge	Ram 2500	ST
2008-2010	Dodge	Ram 2500	SXT
2010	Dodge	Ram 2500	TRX
2006-2007	Dodge	Ram 2500	TRX4
2003-2010	Dodge	Ram 3500	Laramie
2003-2010	Dodge	Ram 3500	SLT
2006-2007	Dodge	Ram 3500	Sport
2003-2010	Dodge	Ram 3500	ST
2008-2009	Dodge	Ram 3500	SXT
2007	Dodge	Ram 3500	TRX4
2013-2018	Ram	2500	Big Horn
2011-2018	Ram	2500	Laramie
2014-2015	Ram	2500	Laramie Limited
2011-2018	Ram	2500	Laramie Longhorn
2016-2018	Ram	2500	Limited
2013-2015	Ram	2500	Lone Star
2012-2016	Ram	2500	Outdoorsman
2011-2018	Ram	2500	Power Wagon
2011-2018	Ram	2500	SLT
2011-2013	Ram	2500	ST
2013-2018	Ram	2500	Tradesman
2013-2018	Ram	3500	Big Horn
2011-2018	Ram	3500	Laramie
2014-2015	Ram	3500	Laramie Limited
2011-2018	Ram	3500	Laramie Longhorn
2016-2018	Ram	3500	Limited
2013-2015,2017	Ram	3500	Lone Star
2011-2018	Ram	3500	SLT
2011-2013	Ram	3500	ST
2013-2018	Ram	3500	Tradesman

The LoadLifter 7500 XL Ultimate offers support for the heaviest tows with an internal jounce bumper, absorbing shock for the smoothest ride. Air Lift’s fully adjustable, industry-leading air springs are the perfect upgrade for your vehicle, eliminating any issues you might face when towing and hauling. The LoadLifter 7500 XL Ultimate kit from Air Lift will give you the ability to drive select RAM 2500 four-wheel drive and select RAM 3500 four-wheel drive with added safety and comfort. Designed with an internal jounce bumper, the kit offers greater leveling strength for your ride at lower pressures. The kit’s 7-inch double-bellows air springs provide up to 7,500 lbs. of load-leveling capacity and help eliminate squat, trailer sway, body roll and bottoming out, keeping your cargo safe and secure while also ensuring a more comfortable ride. The closed-cell urethane foam jounce bumper inside the air spring provides a cushion of air that absorbs shock, eliminates harsh jarring on rough roads, and protects vehicles carrying heavy loads. An Air Lift exclusive, the kit features upper and lower roll plates for added protection. All end caps are made with an ultra-high-strength nylon composite formula, strong as steel but much lighter and corrosion-proof. The air springs are built like tires, reinforced with 2-ply fabric for maximum strength. With the added stability that air springs provide, you can haul safely, knowing that you have optimal braking and steering control. The LoadLifter 7500 XL Ultimate has up to 20% more air spring volume when compared to Air Lift’s LoadLifter 5000 series. The LoadLifter 7500 XL Ultimate’s air springs are maintenance-free, can run safely on zero air pressure, and are fully adjustable from 5-100 PSI for precise control. Do not exceed the vehicle's gross vehicle weight rating (GVWR).

This Part Fits:

Year	Make	Model	Submodel
2003,2005-2010	Dodge	Ram 2500	Laramie
2006-2010	Dodge	Ram 2500	Power Wagon
2003-2010	Dodge	Ram 2500	SLT
2006-2007	Dodge	Ram 2500	Sport
2003-2010	Dodge	Ram 2500	ST
2008-2010	Dodge	Ram 2500	SXT
2010	Dodge	Ram 2500	TRX
2006-2007	Dodge	Ram 2500	TRX4
2003-2010	Dodge	Ram 3500	Laramie
2003-2010	Dodge	Ram 3500	SLT
2006-2007	Dodge	Ram 3500	Sport
2003-2010	Dodge	Ram 3500	ST
2008-2009	Dodge	Ram 3500	SXT
2007	Dodge	Ram 3500	TRX4
2013-2018	Ram	2500	Big Horn
2011-2018	Ram	2500	Laramie
2014-2015	Ram	2500	Laramie Limited
2011-2018	Ram	2500	Laramie Longhorn
2016-2018	Ram	2500	Limited
2013-2015	Ram	2500	Lone Star
2012-2016	Ram	2500	Outdoorsman
2011-2018	Ram	2500	Power Wagon
2011-2018	Ram	2500	SLT
2011-2013	Ram	2500	ST
2013-2018	Ram	2500	Tradesman
2013-2018	Ram	3500	Big Horn
2011-2018	Ram	3500	Laramie
2014-2015	Ram	3500	Laramie Limited
2011-2018	Ram	3500	Laramie Longhorn
2016-2018	Ram	3500	Limited
2013-2015,2017	Ram	3500	Lone Star
2011-2018	Ram	3500	SLT
2011-2013	Ram	3500	ST
2013-2018	Ram	3500	Tradesman

Ball joints are made up of a lower ball joint and upper floating king-pin. The upper ball joint is designed as a pivot point determining the axis on which the knuckle will move and thus, only sees a lateral load. The lower ball joint tracks the knuckle on an imperfect axis, the spherical lower is required to allow the knuckle to move freely with only a slight vertical travel through its steering cycle. Carli Extreme-Duty Upper Ball Joints have a pin and housing but the “hat” of the pin contacts the housing. This adds a second wear surface to further distribute the load applied laterally to the ball joint while providing the same failsafe as a factory ball joint ensuring the pin cannot be pulled through the bottom of the ball joint housing. Further, there is no sleeve isolating the wear surfaces, eliminating the point of failure. A Viton Seal at the bottom of the housing prevents the environment elements from entering the ball joint. The lower joints have no liners of any kind. At the top, a bronze wear surface preloaded by a disc spring, safety washer and snap ring ensures the ball joints wear surfaces are always held tightly together for superior performance. Materials and process play an important role in the impressive durability and performance of Carli Extreme-Duty Ball Joints. It starts with masking. All surfaces but the wear surface are masked with a copper plating. Once plated, the ball joints head to carburizing. The carburizing creates an extremely hard surface with a case-hardness (penetrating depth) of 20-25 thousandths. When the ball joint has completed the carburizing/heat treatment, it’s stripped of the copper masking, leaving the entire joint heat treated and the wear surfaces incredibly hard. The entire joint is then covered with a corrosion resistant gray coating for protection from the elements.

This Part Fits:

Year	Make	Model	Submodel
2003,2005-2010	Dodge	Ram 2500	Laramie
2006-2010	Dodge	Ram 2500	Power Wagon
2003-2010	Dodge	Ram 2500	SLT
2006-2007	Dodge	Ram 2500	Sport
2003-2010	Dodge	Ram 2500	ST
2008-2010	Dodge	Ram 2500	SXT
2010	Dodge	Ram 2500	TRX
2006-2007	Dodge	Ram 2500	TRX4
2003-2010	Dodge	Ram 3500	Laramie
2003-2010	Dodge	Ram 3500	SLT
2006-2007	Dodge	Ram 3500	Sport
2003-2010	Dodge	Ram 3500	ST
2008-2009	Dodge	Ram 3500	SXT
2007	Dodge	Ram 3500	TRX4

The track bar plays a crucial role in the front end of heavy-duty straight axle trucks, serving as both a suspension and steering component. Any deflection or wear in the track bar and its bushings immediately impacts the driver's experience, leading to issues like excessive steering input, floating front end, wandering, and the dreaded Death Wobble. Lifting the truck makes matters worse by putting additional load and strain on the bar by pulling the axle off-center and changing the undercarriage geometry. Carli's Adjustable Track Bar is engineered to address these problems effectively. It deflects less than the stock bar, ensuring improved handling and damping vibrations without compromising performance and allows the axle to be re-centered restoring proper geometry. Unlike the factory bar, Carli's track bar offers an extended service life, being rebuildable rather than replaceable.

This Part Fits:

Year	Make	Model	Submodel
2003,2005-2010	Dodge	Ram 2500	Laramie
2006-2010	Dodge	Ram 2500	Power Wagon
2003-2010	Dodge	Ram 2500	SLT
2006-2007	Dodge	Ram 2500	Sport
2003-2010	Dodge	Ram 2500	ST
2008-2010	Dodge	Ram 2500	SXT
2010	Dodge	Ram 2500	TRX
2006-2007	Dodge	Ram 2500	TRX4
2003-2010	Dodge	Ram 3500	Laramie
2003-2010	Dodge	Ram 3500	SLT
2006-2007	Dodge	Ram 3500	Sport
2003-2010	Dodge	Ram 3500	ST
2008-2009	Dodge	Ram 3500	SXT
2007	Dodge	Ram 3500	TRX4

1" Bump drop is necessary when running any Carli 3" Ram system or makes a great upgrade to lower quality suspension kits.

This Part Fits:

Year	Make	Model	Submodel
2003,2005-2010	Dodge	Ram 2500	Laramie
2006-2010	Dodge	Ram 2500	Power Wagon
2003-2010	Dodge	Ram 2500	SLT
2006-2007	Dodge	Ram 2500	Sport
2003-2010	Dodge	Ram 2500	ST
2008-2010	Dodge	Ram 2500	SXT
2010	Dodge	Ram 2500	TRX
2006-2007	Dodge	Ram 2500	TRX4
2003-2010	Dodge	Ram 3500	Laramie
2003-2010	Dodge	Ram 3500	SLT
2006-2007	Dodge	Ram 3500	Sport
2003-2010	Dodge	Ram 3500	ST
2008-2009	Dodge	Ram 3500	SXT
2007	Dodge	Ram 3500	TRX4

Increase your vehicle's off-road capability by extending drop-out travel in most applications. Experience on-road comfort with performance-minded shock valving for a connected ride with less vehicle sway. Tuned specifically for your vehicle’s application._x000D__x000D_Consistent and fade-resistant performance due to high-quality materials: aluminum bodies, race-developed main piston, and a true internal floating piston (IFP) to separate gas and oil._x000D__x000D_Built-to-last, torture-tested and race-proven to give a lifetime of great rides. FOX products are built from aluminum, dissipating heat four times better than conventional materials. All FOX shocks are fully serviceable and resistant to corrosion and harsh environments.

This Part Fits:

Year	Make	Model	Submodel
2003-2008	Dodge	Ram 1500	Laramie
2002-2008	Dodge	Ram 1500	SLT
2006-2007	Dodge	Ram 1500	Sport
2004-2006	Dodge	Ram 1500	SRT-10
2002-2008	Dodge	Ram 1500	ST
2008	Dodge	Ram 1500	SXT
2006-2007	Dodge	Ram 1500	TRX4
1994-2002	Dodge	Ram 2500	Base
2003,2005-2010	Dodge	Ram 2500	Laramie
2006-2010	Dodge	Ram 2500	Power Wagon
2003-2010	Dodge	Ram 2500	SLT
2006-2007	Dodge	Ram 2500	Sport
2003-2010	Dodge	Ram 2500	ST
2008-2010	Dodge	Ram 2500	SXT
2010	Dodge	Ram 2500	TRX
2006-2007	Dodge	Ram 2500	TRX4
1994-2002	Dodge	Ram 3500	Base
2003-2010	Dodge	Ram 3500	Laramie
2003-2010	Dodge	Ram 3500	SLT
2006-2007	Dodge	Ram 3500	Sport
2003-2010	Dodge	Ram 3500	ST
2008-2009	Dodge	Ram 3500	SXT
2007	Dodge	Ram 3500	TRX4
2013	Ram	2500	Big Horn
2011-2013	Ram	2500	Laramie
2011-2013	Ram	2500	Laramie Longhorn
2013	Ram	2500	Lone Star
2012-2013	Ram	2500	Outdoorsman
2011-2013	Ram	2500	Power Wagon
2011-2013	Ram	2500	SLT
2011-2013	Ram	2500	ST
2013	Ram	2500	Tradesman
2013-2025	Ram	3500	Big Horn
2011-2025	Ram	3500	Laramie
2014-2015	Ram	3500	Laramie Limited
2011-2020	Ram	3500	Laramie Longhorn
2016-2025	Ram	3500	Limited
2021-2025	Ram	3500	Limited Longhorn
2013-2015,2017,2019-2022	Ram	3500	Lone Star
2011-2024	Ram	3500	SLT
2024-2025	Ram	3500	Special Service
2011-2013	Ram	3500	ST
2013-2025	Ram	3500	Tradesman