One piece formed and welded heavy-duty plate provides secure mounting points for tow bar attachment to your Jeep JL Wrangler or JT Gladiator vehicle.

The plate bolts directly to the vehicle frame and replaces the stock steel valance panel. This plate is for use only on vehicles that are equipped with, and intend to retain, the factory Jeep steel bumper.

See our CE-9033JLP offering if your vehicle is equipped with the factory plastic bumper.

Details:

• Tow Bar Mounting Kit
• 18-Up Wrangler JL 20-Up Gladiator w/ Steel Bumper
• Bolt-On
• Includes Mounting Plate
• Tow Bar Attaching Forks
• Hardware
• For Use w/ CE-9033F

Replace the front differential housing upper control arm bushings on your 2007-2018 Jeep JK Wrangler vehicle with Johnny Joint rod ends from RockJock to get maximum articulation out of your suspension!

This kit includes a Johnny Joint insert for gear case ear and installation tool, as well as 1 Inch thick flame-cut steel upright for the tube side, with the Johnny Joint already installed.

This kit has you cut off the top of the stock bracket that is on the tube and install the new RockJock piece into the existing bracket base. You then weld the RockJock piece to the existing bracket base.

This allows for no welding to be done on the tube, resulting in no warpage of the tube.This kit requires cutting and welding equipment for installation!!! Greasable hardware included.

Details:

• Johnny Joint Kit
• 07-18 Wrangler JK Front End Housing (30 or 44)
• Reqs. Welding

Product Videos

RockJock's Johnny Joint adjustable rear trac bar for 2007-2018 Jeep JK vehicles features precise bends for a perfect fit! This bar can be used on a stock JK, on a JK with our Off Road Suspension System, or anything in between!

Bar is fabricated from 1.250 Inch o.d. x .250 Inch wall 4130 chrome moly steel tubing, and features a heavy duty urethane bushing on the frame end, and a custom 1 Inch Right Hand thread forged 2 Inch diameter Johnny Joint greasable rod end with jam nut on the other end. Arm is finished in semi-gloss black powder coat and the forged Johnny Joint end is finished in gold zinc plating.

Details:

• Johnny Joint Trac Bar
• 07-18 Wrangler JK Rear
• Bolt-On
• Adjustable
• Greasable
• 1.25 Inch X .250 Inch Chromoly Tubing

Product Videos

RockJock's Johnny Joint adjustable rear trac bar for 2018 and up Jeep JL Wrangler and JT Gladiator vehicles features precise bends for a perfect fit! This bar can be used on a stock JL/JT, on a JL/JT with our Off Road Suspension System, or anything in between!

Bar is fabricated from 1.250 Inch o.d. x .250 Inch wall 4130 chrome moly steel tubing, and features a heavy duty urethane bushing on the frame end, and a custom 1 Inch Right Hand thread forged 2 Inch diameter Johnny Joint greasable rod end with jam nut on the other end.

Arm is finished in semi-gloss black powder coat and the forged Johnny Joint end is finished in gold zinc plating.

Details:

• Johnny Joint Trac Bar
• 18-Up Wrangler JL Rear
• Bolt-On
• Adjustable
• Greasable
• 1.25 Inch X .250 Inch Chromoly Tubing

Product Videos

RockJock's 4 Inch front coil springs that are included in our Johnny Joint JK 2-door suspension systems, but may also be used in TJ/LJ/JK 4-door applications where 1 Inch less spring height would be ideal.

These springs may also be used in combination with our CE-9132F to address vehicle lean issues. These springs are a dual rate with a combined rate of 70lbs. and a free length of 21.6 Inch. Gloss black powder coated finish.

Details:

• Front Coil Springs
• 07-18 Wrangler JK 2 Door
• 4 Inch (TJ, JK 4 Door-1 Inch )
• Pair

Product Videos

RockJock's 4 Inch front coil springs that are included in our Johnny Joint TJ, LJ and JK 4-door suspension systems, but may also be used in JK 2-door applications where an extra 1 Inch of height is necessary to compensate for heavy winches, bumpers, etc.

These springs may also be used in combination with our CE-9132F1 to address vehicle lean issues. These springs are a dual rate with a combined rate of 70lbs. and a free length of 22.6 Inch. Gloss black powder coated finish.

Details:

• Front Coil Springs
• 97-06 Wrangler TJ, JK 4 Door
• 4 Inch (JK 2 Door +1 Inch )
• Pair

Product Videos

RockJock's optional 4 Inch rear coil springs available for use in our JK 2 or 4-door Johnny Joint suspension systems are 1 Inch taller than our standard springs and are most commonly used In heavily loaded or and/or hard top 2 or 4 door applications.

These springs may also be used in combination with our CE-9132R spring to address vehicle lean issues. These springs are a dual rate with a combined rate of 88lbs. and a free length of 19.55 Inch. Gloss black powder coated finish.

Details:

• Rear Coil Springs
• 07-18 Wrangler JK 2/4 Door
• 4 Inch +1 Inch
• For Heavier Vehicles
• Pair

Product Videos

RockJock's optional 3 Inch rear coil springs available for use in our JK 2 or 4-door Johnny Joint suspension systems are available for the LCG crowd, are dual-rate and provide exceptional ride quality and height control. Finish is gloss black powder coat.

Details:

• Rear Coil Springs
• 07-18 Wrangler JK 2/4 Door
• 3 Inch
• Pair

Product Videos

RockJock's 4-inch lift rear coil springs that are included in our JK 2 or 4-door Johnny Joint suspension systems are a dual rate with a combined rate of 88lbs. and a free length of 18.55 Inch. Gloss black powder coated finish.

In heavily loaded or and/or hard top 2 or 4 door applications, these springs may Not provide a full 4 Inch of lift. In this instance, see our CE-9132R1 spring for a little extra height boost. Additionally, combinations of these springs may be used to address vehicle lean issues.

Details:

• Rear Coil Springs
• 07-18 Wrangler JK 2/4 Door
• 4 Inch
• Pair

Product Videos

RockJock's complete set of all 8 Johnny Joint adjustable length control arms for the 2007-2018 Jeep JK Wrangler features heavy tubular steel construction and Johnny Joint rod ends on both ends.

Johnny Joint rod ends offer 30 degrees of overall travel, are urethane bushed, and are fully rebuildable! Finish is semi-gloss black powder coat on the arms and gold zinc plating on the Johnny Joints.

Details:

• Johnny Joint Control Arm Set
• 07-18 Wrangler JK
• Complete Set Of 8

Product Videos

RockJock's front polyurethane bump stop kit for 2007-2018 Jeep JK Wranglers is designed for use with and is included in all of our JK 4 1/2 Inch lift off road suspension systems.

Kit includes billet aluminum spacers, polyurethane bump stop pucks, all necessary hardware, and complete instructions. Sold as a pair of bump stops.

Details:

• Bump Stop Kit
• 07-18 Wrangler JK Front
• Includes Billet Aluminum Spacers
• Urethane Bump Stops
• Hardware

Product Videos

RockJock's Johnny Joint front lower control arms for the 2007-2018 Jeep JK Wrangler provide length adjustability allowing pinion angle to be adjusted after the installation of a suspension lift.

Additionally the adjustable feature of our arms allows your vehicle to be upgraded to different lift amounts without having to replace the control arms in the future.

Arms are fabricated from 1.625 Inch o.d. x .250 Inch wall d.o.m. steel tubing, feature the 2 1/2 Inch Johnny Joint rod end on one end, and the 1 1/4 Inch Right Hand thread forged 2 1/2 Inch Johnny Joint and jam nut on the other end for maximum articulation. Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating.

Details:

• Johnny Joint Control Arms
• 07-18 Wrangler JK Front Lower
• Adjustable
• Pair

Product Videos

RockJock's high end, billet aluminum Johnny Joint front lower control arms for the 2007-2018 Jeep JK Wrangler are a beautiful addition to any JK build and provide length adjustability allowing pinion angle to be adjusted after the installation of a suspension lift!

Arms are constructed of CNC machined billet 6061-T6 aluminum and are finished in black anodizing with machined highlights. 4130 chromoly skid plates bolt on so that they may be replaced in the future if they are damaged.

Arms are double adjustable via right hand/left hand 1 1/4 Inch thread Johnny Joint rod ends and grade 8 pinch bolts at each end.

Note: These arms will work with 37's on stock width axles and a 4 1/2 Inch backspace wheel. If used with larger tires, you will need to go to a wider axle or wheel spacers.

Arms are a minimum of 3/8 Inch longer than stock and must be used in conjunction with adjustable upper control arms.

Details:

• Johnny Joint Billet Aluminum Control Arms
• 07-18 Wrangler JK Front Lower
• Adjustable
• Pair

Product Videos

RockJock's front shock relocator kit for 2007-2018 Jeep JK Wranglers includes semi-gloss black powder coated relocator brackets for the top of the shocks, all necessary hardware, and complete instructions.

These brackets are included in all of our JK Wrangler suspension systems.

Details:

• Shock Mount Relocation Kit
• 07-18 Wrangler JK Front Upper
• Includes Hardware
• Pair

Product Videos

RockJock's front trac bar relocating kit for 2007-2018 Jeep JK Wranglers relocates the trac bar mounting point on the differential housing upward to correct trac bar geometry after installation of a lift, as well as strengthening the stock trac bar bracket at the same time.

Additionally, this bracket features one trac bar mounting hole for vehicles with standard drag links and one for vehicles with flipped drag links. Kit includes inner and outer bracket and all hardware. Minor welding is required to affix this bracket to the stock axle housing! Detailed instructions included.

Details:

• Trac Bar Relocation Kit
• 07-18 Wrangler JK Front at Diff Housing
• Includes Inner/Outer Brackets
• Hardware
• Some Welding Required

Product Videos

RockJock's Johnny Joint front upper control arms for the 2007-2018 Jeep JK Wrangler provide length adjustability allowing pinion angle to be adjusted after the installation of a suspension lift.

Additionally the adjustable feature of our arms allows your vehicle to be upgraded to different lift amounts without having to replace the control arms in the future.

Arms are fabricated from 1.25 Inch o.d. x .188 Inch wall d.o.m. steel tubing and feature a 2 Inch Johnny Joint rod end on one end, and a formed steel fork and jam nut on the other end.

Arms are finished in semi-gloss black powder coat. Add the CE-9102JK Johnny Joint kit to your front differential to attain maximim articulation from your upper control arms!

Details:

• Johnny Joint Control Arms
• 07-18 Wrangler JK Front Upper
• Adjustable
• Pair

Product Videos

RockJock's high end, billet aluminum Johnny Joint front upper control arms for the 2007-2018 Jeep JK Wrangler are a beautiful addition to any JK build and provide length adjustability allowing pinion angle to be adjusted after the installation of a suspension lift!

Arms are constructed of CNC machined 1 1/2 Inch o.d. aluminum and are finished in black anodize. Arms are double adjustable and feature a 2 Inch Johnny Joint rod end on one end and a formed steel fork and jam nut on the other end.

Add the CE-9102JK Johnny Joint kit to your front differential to attain maximim articulation from your upper control arms!

Details:

• Johnny Joint Billet Aluminum Control Arms
• 07-18 Wrangler JK Front Upper
• Adjustable
• Pair

Product Videos

RockJock's extended rear bumpstops for the 2007-2018 Jeep JK Wranglers is designed for use with and is included in all of our JK 4 1/2 Inch lift off road suspension systems.

Kit includes billet aluminum bump stop spacers that are 3 1/2 Inch in diameter and 3 Inch tall, all mounting hardware and installation instructions.

Details:

• Bump Stop Kit
• 07-18 Wrangler JK Rear
• Includes Billet Aluminum Spacers
• Urethane Bump Stops
• Hardware

Product Videos

RockJock's Johnny Joint rear lower control arms for the 2007-Up Jeep JK and JL Wranglers provide length adjustability allowing pinion angle to be adjusted after the installation of a suspension lift.

Additionally the adjustable feature of our arms allows your vehicle to be upgraded to different lift amounts without having to replace the control arms in the future.

Arms are fabricated from 1.625 Inch o.d. x .250 Inch wall d.o.m. steel tubing, feature the 2 1/2 Inch Johnny Joint rod end on one end, and the 1 1/4 Inch Right Hand thread forged 2 1/2 Inch Johnny Joint and jam nut on the other end for maximum articulation. Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating.

Details:

• Johnny Joint Control Arms
• 07-Up Wrangler JK and JL Rear Lower
• Adjustable
• Pair

Product Videos

RockJock's high end, billet aluminum Johnny Joint rear lower control arms for the 2007-Up Jeep JK and JL Wranglers are a beautiful addition to any JK or JL build and provide length adjustability allowing pinion angle to be adjusted after the installation of a suspension lift!

Arms are constructed of CNC machined billet 6061-T6 aluminum and are finished in black anodizing with machined highlights. 4130 chromoly skid plates bolt on so that they may be replaced in the future if they are damaged.

Arms are double adjustable via right hand/left hand 1 1/4 Inch thread Johnny Joint rod ends and grade 8 pinch bolts at each end.

Note: These arms will work with 37's on stock width axles and a 4 1/2 Inch backspace wheel.

If used with larger tires, you will need to go to a wider axle or wheel spacers. Arms must be used in conjunction with adjustable upper control arms.

Details:

• Johnny Joint Billet Aluminum Control Arms
• 07-Up Wrangler JK and JL Rear Lower
• Adjustable
• Pair

Product Videos

RockJock's rear shock relocator kit for 2007-2018 Jeep JK Wranglers includes zinc plated spacer sleeves and all hardware to relocate the bottoms of the rear shocks. Detailed instructions included.

These brackets are included in all of our JK Wrangler suspension systems.

Details:

• Shock Mount Relocation Kit
• 07-18 Wrangler JK Rear Lower
• Includes Hardware
• Pair

Product Videos

RockJock's rear trac bar relocating kit for 2007-2018 Jeep JK Wranglers relocates the trac bar mounting point on the differential housing upward to correct trac bar geometry after installation of a lift, as well as strengthening the stock trac bar bracket at the same time.

Kit includes inner and outer bracket and all hardware. Minor welding is required to affix this bracket to the stock bracket and to the axle tube! Detailed instructions included.

Details:

• Trac Bar Relocation Kit
• 07-18 Wrangler JK Rear at Diff Housing
• Includes Inner/Outer Brackets
• Hardware
• Some Welding Required

Product Videos

RockJock's rear upper control arms for 2007-Up Jeep JK and JL Wranglers provide length adjustability allowing pinion angle to be adjusted after the installation of a suspension lift.

Additionally the adjustable feature of our arms allows your vehicle to be upgraded to different lift amounts without having to replace the control arms in the future.

Arms are fabricated from 1.25 Inch o.d. x .188 Inch wall d.o.m. steel tubing, feature the 2 1/2 Inch Johnny Joint rod end on one end, and the 1 1/4 Inch Right Hand thread forged 2 1/2 Inch Johnny Joint and jam nut on the other end for maximum articulation. Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating.

Details:

• Johnny Joint Control Arms
• 07-Up Wrangler JK and JL Rear Upper
• Adjustable
• Pair

Product Videos

RockJock's high end, billet aluminum Johnny Joint rear upper control arms for the 2007-Up Jeep JK and JL Wrangler are a beautiful addition to any JK or JL build and provide length adjustability allowing pinion angle to be adjusted after the installation of a suspension lift!

Arms are constructed of CNC machined 1 1/2 Inch o.d. aluminum and are finished in black anodize. Arms are double adjustable and feature a 2 Inch Johnny Joint rod ends and jam nuts on both ends for maximum articulation.

Details:

• Johnny Joint Billet Aluminum Control Arms
• 07-Up Wrangler JK and JL Rear Upper
• Adjustable
• Pair

Product Videos